                        =================================
                           AltiWare Open Edition 4.0
                                 Release Notes
                                October 30, 2000
                        =================================

        Please read this Readme.txt file COMPLETELY before you install the software
        on your AltiServ system.


                                 ==============
                                    Contents
                                 ==============

        This distribution of the AltiWare Open Edition 4.0 consists of the
        following products, each of which is located in the folders mentioned
        below.

	AltiWareOE Folder   - Contains the AltiWare Administrator as well as
 		       	      the AltiGen switching service, SMTP/POP3 server,
	 		      Exchange Integration server, messaging agent,
			      and AltiBackup.

	AltiAdmin Folder    - Contains the AltiWare Administrator that can be run
                              remotely from a computer other than the AltiServ
                              system to perform various administration tasks.

	CDR Folder
	CDRSearchSetup      - Contains the AltiWare Internal CDR Search Client
			      that can be installed on Windows 95/98/NT.

	ExternalLoggerSetup - Contains the AltiWare CDR External Logger that should
			      be installed along with a SQL Server.

	Documentation Folder- Contains the Getting Started Manual, System
		 	      Administration Manual, and AltiServ User Guide in
			      Adobe Acrobat PDF format.
	Tools Folder
	GateKeeperSetup     - Contains the Gate Keeper for Siemens IP Calls that
      			      should be installed if Siemens IP Phone is used.

	CallRouterSetup     - Contains the AltiWare In Call Routing Client
			      which is an example for AltiControl applications.

	Exchange Assistant  - Contains the Exchange integration assistant program
			      that provides the step by step instructions to make
			      the required setups and configurations for Exchange
			      integration.

	TAPIProxySetup      - Contains the AltiWare TAPI Server installation software.

	TAPISPSetup         - Contains the AltiWare TAPI Client installation software.

	OE3.5A Folder       - Contains VoIP patch for OE 3.5A and installation instruction.

	Reader Folder       - Contains Acrobat Reader installation software.



                         ================================
                             Features in this release
                         ================================
     
	Hardware Support
	----------------
        * Up to 4 PCI single span T1/PRI boards with the following features
	  a) ISDN PRI connections
	  b) ISDN PRI tie trunk
	  c) T1 tie trunk
	  d) Back to back T1/PRI connections
        * Up to 6 PCI VoIP boards with the following features
	  a) New VoIP board with 8 IP ports
	  b) New echo-canceller
	  c) IP tie trunk
	  d) IP extension
	* Up to 2 PCI Resource boards for call center applications
        * Up to 16 Triton PCI extension boards
        * Up to 16 Quantum boards
 

	AltiWare New Features
	---------------------
	* Call Center features (Center 4.0)
	  a) Agent Wrap Up, Ready and Not Ready
	  b) Silent Monitoring
	  c) Barge In
	* New workgroup features
	  a) Real-Time Monitoring, Statistics and Service Level Threshold
	  b) Longest Available Agent and Ring All
        * Configurable outcall routing
	* DNIS Based incall routing
        * Multi-Tenant support for outgoing calls
        * Voice mail distribution lists
	* Basic IVR Support with up to 255 Auto Attendants
	* New CTI link - AltiLink+
	* New CDR Format and Enhancements
	* External database support for CDR logging
        * Data directed incall routing
	* Auto log-off on Ring No Answer for workgroup agent
	* In call routing for Web calls
	* Monitoring List
        * Selectable drive for Postoffice installation
	* Installation tool for Exchange integration
	* MVIP test tool
	* Utility to expand extension length

	AltiAdmin New Features
	----------------------
	* Rearranged Configuration Parameters and Tabs 
	* Auto Attendant GUI changed from Menu based to Tree Based Structure 
	* Workgroup Member Login/Logout Status Display
	* Workgroup Summary Display Window
	* Serial Number Display in the Board View for all Triton family boards
	* First and Last Names Display Added for Extension Numbers 

			
                 ==============================================
                  Important information regarding this Release
                 ==============================================

        * Does NOT support Quantum Rev C/C+ boards.
        * Does NOT support MAPI and SBS(Small Business Server).
        * If you are upgrading your AltiWare system to OE 4.0, the AltiWare
          Administrator password will be set to the default value(22222).
        * To protect your AltiServ system from hackers, make sure that all users
	  change their voice mail password from the default value as soon as
	  possible.
        * Before running Exchange integration service, Exchange (5.5) client should
	  be installed on the AltiServ system.
        * To install the Exchange Integration service, please use the new "Exchange
	  Integration Assistant" utility for a quicker setup and error-free
	  configurations.
        * Exchange Integration service synchronizes voice messages on the Exchange
          server with those on the AltiServ system by polling the two servers
          periodically. This polling interval can be adjusted by creating a DWORD
	  value called "Polling Interval" under the key
	  "HKEY_LOCAL_MACHINE\SOFTWARE\AltiGen Communications, Inc.\AltiWare\
	  ExchIntg". This DWORD value should contain the number of milliseconds
	  between polling. If this value is not present in the registry, a default
	  value of 60000 (1 minute) is used by the system. For performance reasons,
	  you should not set this value to below 60000. 
        * AltiWare OE must be installed before any third party applications. 
          Contact your third party application vendor(s) to find out if an upgrade
	  is required for their product to work with the AltiWare OE release you are
          about to install. 
        * AltiView/Center VM Service must be installed on the same system that AltiWare
	  has been installed.
        * Center Server License must be installed via AltiWare setup before Call
	  Center features can be used.  
        * Triton resource board is required to provide "Silent Monitor" and "Barge-in" 
	  Call Center functions.
        * To avoid toll fraud, trunk to trunk calls (Calls made into the system from
          off-premise and then dialing out to an external number using Boomerang or 
          calling out from voicemail) will be allowed only when the "Allow Off-
	  Premise Mailbox User to Make or Return Calls from VoiceMail" option in the
	  Calling page of Extension Configuration is enabled for a user. 
          BY DEFAULT, THIS OPTION IS DISABLED FOR ALL USERS.
        * The Start/Shutdown Switching options in AltiAdmin are not available when 
          AltiAdmin is running on a remote system.
        * CDR records and System Traffic information can be accessed ONLY from the
          CDR search client software.  They cannot be accessed from AltiAdmin any more.
        * A new user account called "AltiGen_<machinename>" is created during  
          installation. This account is used by all the AltiGen services as their 
          identity. Do not delete this account or change its password.
        * Messages that are larger than 20 MB in size could seriously affect real
	  time performance since AltiServ uses a built-in E-mail server using a
	  single system's resources. Please instruct users to keep messages
	  relatively small or use a separate E-mail server with Mail Forwarding
	  enabled to allow users to access voice mail and E-mail from the same
	  server. Mixed-Media Messaging (attaching voice messages to E-mail
	  messages) is unavailable when using a separate E-mail server.
  
				=================================
				911 calling with Out Call Routing
				=================================
	Warning: If you use "Route Access" instead of "Trunk Access", make sure 
	that default 911 route is configured to the route that can accept 911 calling 
	capability. Fail to do so may cause 911 direct dialing failure. If custom 
	does not want user to call 911 direct or extension users make too much 911 
	related dialing mistake, you can leave 911 default not configured. In this 
	case, you need to let all extension users know that they need to dial 9+911 
	to call 911. It would be a good idea if you can have them sign a 911 dialing 
	disclaimer which state that they understand and accept the 9+911 configuration.
		

				==============	
				MVIP Test Tool
				==============

	The MVIP test tool can detect one-way connections, cross talk, bad MVIP cable,
        and static noise problems. AltiGen recommends users to run the test when any
        hardware or software changes are made to the AltiGen system.
 

	There are 2 ways that you can run MVIP test tool:

	A. From Windows Start menu: (Recommended)
	1. Stop "AltiGen Switching Service" from "Services" in Control Panel or click
           on "Shutdown Switching" from AltiWare Administrator. 
	2. Run "MVIP Test Tool" from Start->Programs->AltiWare->AltiWare Tools
	3. The test results will indicate MVIP failures, if any.

	B. From AltiWare Administrator:
	1. Select "Automatically run MVIP test tool at startup" option from the MVIP
           Clock Configuration window.
	2. Restart Windows system.
	3. The automatic MVIP test will only run once and can take up to 15 minutes.
	4. The test result will be stored in both Windows Event Viewer and
           \altiware\log\mviperr.txt file.
	5. Please note: If the test fails in any way, AltiGen Switching Service will 
           not start.

 	
 
                    =========================================
                     AltiWare OE 4.0 Installation Procedure
                    =========================================

        The total disk space required to install AltiWare OE 4.0 is at least 
        200 Mbytes, which includes the AltiWare services, AltiWare Administrator,
        English Phrases v3.0 and space reserved for the AltiMail Post Office.


        1. New AltiWare installation
	   ~~~~~~~~~~~~~~~~~~~~~~~~~
        Please follow the following steps to install AltiWare:

	1) Login to Windows NT as a domain user account which has both local and
           domain administrator privileges. If your machine is a standalone server,
           you need to login as a local administrator account.
	2) Insert the AltiWare OE CD-ROM into the CD-ROM drive.
	3) Select and read the Readme.txt file.
	4) After reading the Readme.txt file, click on SETUP.EXE in the AltiWareOE
           folder.
	5) Follow the instructions on the AltiWare installation wizard setup screens.

	When prompted, enter the product CD key (located on "Certificate of 
        Entitlement"). You will need this CD key when contacting AltiGen for technical 
        support.

        If you are installing AltiWare for the first time on the AltiServ system,
        at the end of the installation process, you will be prompted to enter
        some system configuration parameters. Please enter appropriate configuration
	data to complete the installation. System configuration can be changed at a
	later time by running AltiAdmin.

        After the installation, you MUST shutdown and reboot Windows NT or MS 2000 in
        order to activate the installed AltiWare Services.


        2. Upgrade from an earlier AltiWare
	   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
	NOTE: For AltiWare 3.5 Exchange Integration Users:
	AltiWare 4.0 Exchange Configuration has been modified to allow you to select 
        Extensions that will use the Exchange Integration on an individual basis. 
	
	Follow the steps below prior to upgrading from 3.5 to 4.0. if you are using 
        Exchange Integration.
	1) Disable Exchange Integration option from the Messaging Tab in System 
           Configuration. 
	2) Follow the Upgrade Instructions listed below to upgrade AltiWare 3.5 to 4.0
           and return to step 3.
	3) After AltiWare starts, go into Extension Configuration/Mailbox Setting Tab and 
           enable Exchange Message Synchronization for each extension that will integrate 
           with the Exchange Server. 
	4) Enable Exchange Integration option from the Messaging Tab in System
           Configuration.         


	Upgrade Instructions
	--------------------
	I) Before you start installing this upgrade on your AltiServ system,
        please make sure that AltiWare Administrator and AltiGen Switching Services
	are not running. The following procedures can be used to stop AltiWare:

	From AltiAdmin
	--------------
	On AltiAdmin main screen, select "Services/Shutdown Switching". This will
	stop both AltiAdmin and AltiGen Switching Services.

	From Control Panel
	------------------
        1) Exit AltiWare Administrator.
        2) Double-click on Services in Control Panel.
        3) Highlight "AltiGen Switching Service COM Server".
        4) If the Status column is empty, system has been shutdown already.
        5) If the status column says "Started", then click the Stop button.
        6) If a dialog pops up with a confirmation box, choose Yes.
        7) Wait for system to end the shutdown process.

        II) Before you upgrade your AltiWare software to this new version, it is
        recommended that you backup all the current configuration information to a 
        floppy or a different location, such as a network drive. (You can do this 
        by using the backup utility or by copying the contents of \altiserv\db, 
        \PostOffice\, and \altiserv\phrases\LangCustom folders to a backup location)
        This is done to protect your data just in case something goes wrong.

        III) There is no need to uninstall the earlier version of AltiWare software.
	However, If you decide to uninstall the AltiWare program, simply click on
        the "Uninstall" icon in AltiWare program group. Remember that uninstalling
        AltiWare does not remove the configuration and messages.
        However, be sure to backup custom phrases from \altiserv\phrases\LangCustom
        directory before you uninstall AltiWare OE 2.1 or earlier version of
	AltiWare.

        IV) Follow step 1 through 5 under AltiWare New installation above. 
        When prompted, enter the CD key (located on "Certificate of Entitlement").
        You will need this CD key when contacting AltiGen for technical support.

        As part of the OE 4.0 software installation, your configuration data will
        be upgraded automatically.

        After the installation, you MUST shutdown and reboot Windows NT or MS 2000 in 
	order to activate the installed AltiWare Services.


        3. Software License Upgrade
           ~~~~~~~~~~~~~~~~~~~~~~~~
        To increase the number of physical extensions, follow the steps below:

        1) Run the SETUP.EXE in the AltiWare OE folder.
        2) Select the "Upgrade Port License" option
        3) Enter the CD keys (located on "Certificate of Entitlement").
        4) After the code is validated, the system will confirm that the upgrade
           was successful and ask if you wish to add additional licenses. If YES,
           then enter the next CD key assigned to the software license package.
           Click NO if you are finished upgrading.

        It is not required to reboot the system after increasing the number of
	licenses.
	

        4. Client Products
           ~~~~~~~~~~~~~~~
        To install a client product, run the SETUP.EXE program in the appropriate
        folder in the CD. For example, to install AltiAdmin on a client system, run
        SETUP.EXE from the "AltiAdmin" folder. Follow the instructions provided by
	the setup program to complete installation.

        Please be sure to install AltiWare server software before installing any
        client applications.


                      ===================================
                       AltiWare Uninstallation Procedure
                      ===================================

        Be sure to stop all the AltiWare related services before uninstallation.
        You can do this by clicking on "Shutdown Switching" from the Services menu
        of AltiAdmin.

        Alternatively, you can stop the services from the Services applet in
        Control Panel.
        The following is the list of NT Services distributed with AltiWare:

		* AltiGen Switching Service COM Server
		* AltiGen Messaging Service COM Server
		* AltiGen SMTP Service COM Server
		* AltiGen POP3 Service COM Server
		* AltiGen Exchange Integration Service COM Server
		* AltiGen Internal Logger Server
		* AltiGen Backup / Restore Service
		* AltiGen Keep Up Service
		* AltiView VM Service

        Note that stopping the "AltiGen Switching Service COM Server" will
        automatically stop all the auxiliary services except AltiGen Backup/
	Restore Service. In the event that the auxiliary services were not
	stopped, please stop them one at a time from the Services applet in the
	Control Panel.

        Then launch the Uninstall program by clicking the "UnInstall AltiWare
        OE 4.0" icon in the AltiWare program folder and select YES to uninstall
        AltiWare.


                    ======================================
                      AltiWare Bootup/Shutdown Procedure
                    ======================================

        To check if the installation is done properly, please go through
        the default setup to verify that both the switching and messaging
        functions work as described in the AltiWare manual.

        If the installation is done properly, AltiWare will automatically start
        after the system reboots. Please double click on the "Services" icon in
        Control Panel to verify that the services mentioned below are installed
        and have been started depending on your configuration:

        1. "AltiGen Switching Service COM Server"
        2. "AltiGen Messaging Service COM Server"
        3. "AltiGen SMTP Service COM Server" (if Email Services has been turned on)
        4. "AltiGen POP3 Service COM Server" (if Email Services has been turned on)
        5. "AltiGen Exchange Integration Service COM Server" (if service enabled)
        6. "AltiGen Internal Logger Server"
        7. "AltiGen Backup / Restore Service"
        8. "AltiGen Keep Up Service"
        9. "AltiView VM Service"


                        ==================================
                           Known Issues / Workarounds
                        ==================================

	AltiWare
	========
	6042  The Triton Analog boards may not ring phones with Z rated ringers.

	4134  The first time you reboot a system with 2000 and Triton Analog boards installed 
	      the system detects new hardware.  You need to specify the INF directory the first 	
	      time. 

	4187  Hop-Off restriction - Upgrade will not automatically take OE Release 3.5 
	      settings, user must reconfigure the setting in OE Release 4.0 after installation.
	      Hop-off is restricted by an extensions outcall restriction. It used to be 
	      IP-trunk based configuration. In 4.0, it is a system global setting which affects
	      T1, ISDN and IP	trunks.

	5462  Multiple NIC cards are not supported in AltiWare 4.0.

	5650  Personal queue greetings are not heard unless a personal greeting is recorded and
	      selected.

	6401  AltiConsole can take a significant amount of time to connect to an AltiServ
	      system with > 1000 extensions configured.

	4659  The (*) option used with Hop-Off is not supported in 4.0. You must dial the trunk
	      access code.

	6684  Cannot add an existing VM Dlist to a new VM Dlist via the VM interface. This can be
	      done via AltiView/Agent.


	IP Extension	
	============
	4329  If no IP ports are available when you go offhook on a Quicknet IP extension,
	      Quicknet plays "The person you are calling is not on line. If you know the
	      telephone number, you can hang up and try again using PC to Phone

	4248  When using the Quicknet as an IP extension, you can adjust echo cancellation by
	      using echo cancellation in the Quicknet GUI to adjust.

	5654  IP extension associated with AltiConsole is NOT supported 

	6600  #81/#82 is not supported on IP extensions.

	6224  (Siemens IP Phone) When you hang up from a call the status on the Siemens Phone
	      is "Clearing." If you call the extension during this time calls go to the IP
	      extension VM.

	6590  (Siemens IP Phone) We have found that the Siemens devices are somewhat unreliable
	      even with the latest firmware build installed.
	      The symptoms include:
	      1. Locking up at times. The phone basically hangs in the same state regardless of
	         trying different functions, pushing buttons, etc.
	      2. Will change states on the display such as indicating that it is seizing an IP
	         channel, accept digits, buttons light, etc, but the phone is not talking to
	         AltiWare. Powering off and then on (resetting) the device corrects the problems.

	6600  If you use #81/#82 with Siemens devices the call will connect as expected on the
	      first call to the phone.  The second attempt also connects but the phone is now
	      in a different state and thinks it has put the previous call on hold.  All
	      subsequent calls to the phone will go the VM.

	6592  Multiple Call Waiting is not supported with the Siemens device. Siemens IP Extension
	      device can exhibit erratic operation when configured with Multiple Call Waiting and 
	      Place Caller in Queue. Intermittently if you queue for
	      a Siemens device, the queued caller goes to VM instead of ringing the phone.
	      Siemens IP phones states go from consultation (which is displayed when in
	      connecting/connect states) and then to Clearing (when the call is disconnecting)
	      to Cleared (when the call is disconnected). The state of Clearing can vary from
	      call to call or action to action performed on the device (5 - 20 seconds).  If
	      you have Multiple Call Waiting set for the phone, Intermittently when you are on 
	      a call and then another call goes into queue the call in queue will forward to VM
	      instead of ringing the phone. It is not recommended to use multiple call waiting
	      with the Siemens device. You may be able to work around this in a WorkGroup if
	      you have wrap up time set to longer than the device will stay in the clearing
	      state.

	6574  When you take the receiver off hook and dial # the Siemens phone insert's another
	      #.

	5463  It takes about 2 seconds for the speech path to be cut through on the Siemens 
	      device. If you answer a call on the Siemens IP device and start talking, the
	      "hello" is not present to the called/calling party does not hear anything for a
	      couple of seconds.  

	TAPI
	====
	****  Patch is needed for TAPI Gateway to link and to run successfully.

	****  TAPI Caller ID and Callee ID maximum size is 20 digits.

	6246  TAPI client uninstall does not function on Win98.  It must be removed manually.


                            ======================
                              Technical  Support
                            ======================

        End users of AltiWare OE 4.0, please contact your dealer for technical
        support.

        Dealers, please contact:

        Technical Support
        AltiGen Communications, Inc.
        47427 Fremont Blvd.
        Fremont, CA 94538, USA
        TEL: (510) 252-9712
        FAX: (510) 252-9738
        E-Mail: support@altigen.com
        Web site: http://www.altigen.com/support/home.html
